Repeatability is the function that is absolutely essential to a long series of rifle scope. Most of the areas alleged registration repeatable. That said, you should never rely solely on their allegations. A careful analysis of the scope of the results for repeatability is a must. One area that do not meet the high demands that you need for long-term employment must discard.
Repeatability extent have problems dealing with the height and lateral adjustment. For this reason, it is necessaryTest both settings to see if the results they produce are repeatable.
Zero Repeatability
This test will help to ensure that the scope of use is consistent when it comes to his point "zero".
First make sure you use a specific shotgun with a barrel cool. This is essential if you want to be left to a fair system that shitty dump and with a rifle.
Assemble the frame according to the instructions. Pay particular attention to ensuringthat the rifle is stable. To this end, and is a strong bank can be used. You do not need any wind here, as you can skew the results so that only the tests conducted on a quiet day with no wind.
Zero the rifle scope and fire a shot. Then turn the rifle scope a couple of times throughout the area and make it back to zero. Shoot again. The two shots should fall exactly in the same hole, with no acceptable deviations. Then randomly select a radio button selection survey through various rotations andback to zero. Take another shot and see if it is repeatable. A good frame should be no problem here.
They have the same test with a revolver drag. Of course, lateral adjustment is very important at longer intervals, so you must ensure that there is a solid and reliable as the height adjustment.
Playing in the final stages of testing, with vertical and lateral adjustment turrets. Change the settings randomly and then zero, both buttons and shoot. All the balls are back in the fallthe same hole. If this does not happen and what you see, looks more like a sieve, the scope is useless. If the results are OK and you see a hole clean, if necessary, to test reproducibility worse.
Linear Repeatability
Now we must ensure that the readings actually investigating and windage turrets, what they say. The tower seems reliable, zero if they are repeatable, but pure nonsense if we try to observe some of the specific adaptationsButtons produce results that MOA clicks.
First, you install a target 50 meters away from the gun. Zero the rifle scope and shooting. Then rotate the knob one full-time and shoot again. Repeat the procedure several times until you reach the upper limit of the setting. The trick is to test
a) to see if any revolution is about to equal intervals and MOA
b) confirm the stability of the lateral horizontal adjustment.
What you should be able to see the endthe test is a straight vertical line with equidistant spacing between the holes.
The same test is perfect for the repeatability of lateral adjustment, only this time, you will eventually be controlled, as a straight horizontal line, appearing with several holes on both sides of the dead, finely lined up neatly in equidistant intervals.
Repeat the test several times to make sure that the selected field is repeatable. Then down to scale with 1 / 2 turns instead of a fullone. An ideal environment, should have no problem with this path.
Finally, the test is complicated by derivation and the accuracy of elevation, at the same time. The result looks like a nice diagonal to start looking for the dead.
Finally, the repeatability of the scope is confirmed. Now that makes sure that the guides do not lie, we can point to other, specific settings and demanding.
0 comments:
Post a Comment